Submit Feedback
Legacy Knowledge Base
Published Jun. 30, 2025

Keep-alive setting for VPN

Written By

Daniel Carrillo Broeder

How To articles are not official guidelines or officially supported documentation. They are community-contributed content and may not always reflect the latest updates to Liferay DXP. We welcome your feedback to improve How To articles!

While we make every effort to ensure this Knowledge Base is accurate, it may not always reflect the most recent updates or official guidelines.We appreciate your understanding and encourage you to reach out with any feedback or concerns.

Legacy Article

You are viewing an article from our legacy "FastTrack" publication program, made available for informational purposes. Articles in this program were published without a requirement for independent editing or verification and are provided"as is" without guarantee.

Before using any information from this article, independently verify its suitability for your situation and project.

Issue

  • What is the default keep-alive setting for the Liferay Cloud VPN client?

Environment

  • Liferay PaaS/SaaS VPN client-to-site VPN.

Resolution

  • PaaS/SaaS VPN Client: Uses standard Strongswan keep-alive configuration, typically 20 seconds.
  • VPN Server: Will define its own custom keep-alive and DPD(Dead Peer Detection) settings.
  • Please, contact our support team for specific configuration requests.

Additional Information

Did this article resolve your issue ?
Legacy Knowledge Base
Did this article resolve your issue ?