Exercise: Run Liferay and Elasticsearch Using Docker

7.3+

Here you can walk through a minimal Liferay-Elasticsearch setup on your local machine to see how a secure REST Client connection between Elasticsearch and Liferay is configured. The example uses two Docker containers: one Elasticsearch container and one Liferay container. For more conceptual and production-like information see Installing Elasticsearch.

Create Local Folders for Bind Mounting to the Docker Containers

Create local folders that can be bind mounted to the Elasticsearch and Liferay containers’ system folders for providing plugins and configuration files. Since Elasticsearch must write to the mounted folder, the -m a+w modifier is given to the following mkdir command. You must understand and apply the proper permissions applicable to your system:

mkdir -p test-es-install/dxp/files/osgi/configs && mkdir -p test-es-install/elasticsearch -m a+w && cd test-es-install
Tip

The cd test-es-install command at the end puts you in the test-es-install folder. Make sure you run the remaining commands for both Elasticsearch and Liferay from this folder.

Install Elasticsearch

  1. Configure and start an Elasticsearch container named elasticsearch:

    docker run -it --name elasticsearch -m 1g -p 9200:9200 -e "discovery.type=single-node" -e "node.name=es-node1" -v $(pwd)/elasticsearch:/usr/share/elasticsearch/data docker.elastic.co/elasticsearch/elasticsearch:8.11.4
    

    Once started, log messages with important security information are printed:

    Elasticsearch starts and prints useful information in the log.

  2. Copy the password for the elastic user locally.

  3. Obtain the keystore password. Open a new terminal window, then open an interactive shell on the new container:

    docker exec -it elasticsearch /bin/bash
    
  4. Use ./bin/elasticsearch-keystore to print the password to the command line:

    ./bin/elasticsearch-keystore show xpack.security.http.ssl.keystore.secure_password
    

    Copy the keystore password locally.

  5. Install the required Elasticsearch plugins:

    ./bin/elasticsearch-plugin install analysis-icu && /usr/share/elasticsearch/bin/elasticsearch-plugin install analysis-kuromoji && /usr/share/elasticsearch/bin/elasticsearch-plugin install analysis-smartcn && /usr/share/elasticsearch/bin/elasticsearch-plugin install analysis-stempel
    
  6. When the plugins are installed, exit the shell by typing exit.

  7. Restart the Elasticsearch container to register the plugins. CTRL+C stops the container. Start it again by running

    docker start -i elasticsearch
    
  8. On first startup, Elasticsearch created a security certificate you need for encrypting the HTTP connection with Liferay. Copy the certs folder from the running container to the test-es-install/dxp/files/ folder:

    docker cp elasticsearch:/usr/share/elasticsearch/config/certs/ dxp/files/
    
  9. Docker must copy these into the Liferay container, and Liferay must read from these files, so make sure the file permissions are appropriate:

    chmod -R a+rwx dxp/files/certs/
    

    This is for local testing only. You must understand and ensure the permissions are appropriate for your system.

  10. Get the elasticsearch container’s IPv4 address so it can be added to Liferay’s docker run command:

    docker network inspect bridge
    

    Copy the IPv4 address locally.

Install Liferay

Specify the properties Liferay needs to connect with Elasticsearch; then run the Liferay container.

  1. First populate the Elasticsearch 7 configuration file. Create the file com.liferay.portal.search.elasticsearch7.configuration.ElasticsearchConfiguration.config:

    touch dxp/files/osgi/configs/com.liferay.portal.search.elasticsearch7.configuration.ElasticsearchConfiguration.config
    
  2. Open the file and give it these contents, replacing the password and truststorePassword with those you copied from Elasticsearch, and inserting the IPv4 of the elasticsearch container in the networkHostAddresses property if it’s different:

    password="[ELASTIC_PASS]"
    truststorePassword="[KEYSTORE_PASS]"
    networkHostAddresses="https://172.17.0.2:9200"
    
    authenticationEnabled=B"true"
    httpSSLEnabled=B"true"
    logExceptionsOnly="false"
    productionModeEnabled=B"true"
    truststorePath="/opt/liferay/certs/http.p12"
    truststoreType="pkcs12"
    username="elastic"
    

    Save and exit the file.

  3. Now the security certificate files and the configuration file are in place. They’ve been added to folders on the host system that the Liferay Docker container can read from (test-es-install/dxp/files). Start the Liferay container:

    docker run -it --memory 9g --name liferay --publish 8080:8080 --volume $(pwd)/dxp:/mnt/liferay liferay/portal:7.4.3.112-ga112
    

    If you’re using Liferay 7.3, replace the version in the command above.

  4. Checkpoint: Verify that the Elasticsearch connection is active in Control Panel → Configuration → Search.

    An active connection is displayed in the Search administrative panel.

Reindex your search and spell check indexes. Both reindex actions are carried out from the Index Actions tab of Control Panel → Configuration → Search.

Cleaning Up Exercise Files

To clean up all the items created for this exercise, first stop the containers, then

  1. Remove the docker containers:

    docker container rm elasticsearch liferay
    
  2. Remove the folder structure. First make sure you’re in the parent of the test installation folder (i.e., ../test-es-install)., then run

    rm -fr test-es-install
    

This leaves you with just the Docker images you used to create the containers. If desired, you can remove those with the docker image rm [image-name] command.

Capabilities

Product

Contact Us

Connect

Powered by Liferay
© 2024 Liferay Inc. All Rights Reserved • Privacy Policy