Using properties dl.file.max.size and dl.file.extensions in Liferay DXP 7.4
How To articles are not official guidelines or officially supported documentation. They are community-contributed content and may not always reflect the latest updates to Liferay DXP. We welcome your feedback to improve How To articles!
While we make every effort to ensure this Knowledge Base is accurate, it may not always reflect the most recent updates or official guidelines.We appreciate your understanding and encourage you to reach out with any feedback or concerns.
Legacy Article
You are viewing an article from our legacy "FastTrack"
publication program, made available for informational purposes. Articles
in this program were published without a requirement for independent
editing or verification and are provided"as is" without
guarantee.
Before using any information from this article, independently verify its
suitability for your situation and project.
Issue
- Guidance on Setting Maximum File Upload Size and Allowed Extensions in Liferay 7.4 with the help of
dl.file.max.size and dl.file.extensions properties.
Resolution
- In Liferay DXP 7.4, the properties
dl.file.max.size and dl.file.extensions have been deprecated. These settings can now be configured directly through the Liferay System Settings GUI.
-
Setting Maximum File Upload Size
- Navigate to Control Panel > System Settings > Content and Data > Documents and Media > Document and Media Size Limits.
- Locate Total Maximum File Size and set the desired file size limit.
-
Note: If the default value is 0, it allows unlimited file size
-
Setting Allowed File Extensions
- Navigate to Control Panel > System Settings > Documents and Media > Services.
- Locate File Extensions and specify the allowed file extensions for uploaded files.
-
Note: If the default setting is *, permit all file types for upload.
Did this article resolve your issue ?