Despite the fix "Relay state exceeds 80 bytes" error and redirections to IDP
How To articles are not official guidelines or officially supported documentation. They are community-contributed content and may not always reflect the latest updates to Liferay DXP. We welcome your feedback to improve How To articles!
While we make every effort to ensure this Knowledge Base is accurate, it may not always reflect the most recent updates or official guidelines.We appreciate your understanding and encourage you to reach out with any feedback or concerns.
Legacy Article
You are viewing an article from our legacy "FastTrack"
publication program, made available for informational purposes. Articles
in this program were published without a requirement for independent
editing or verification and are provided"as is" without
guarantee.
Before using any information from this article, independently verify its
suitability for your situation and project.
Issue
- Despite the fix "Relay state exceeds 80 bytes" error and redirections to IDP
- We found this article and had a hotfix with LPS-76246
- We found that the fix is not applied correctly.
Resolution
- The fix is not applied correctly due to the old SAML connector in Liferay 7.3
- This could be checked by
lb | grep -i "saml" in Gogo shell.
- Liferay Connector to SAML 2.0 requires a fix.
- Reach out to support for a hotfix for the LPKG file.
Did this article resolve your issue ?