Using Default Synchronous Messaging in Previous Versions

Important

Synchronous messaging was removed and is no longer supported for Liferay DXP 7.4 U49/Liferay Portal 7.4 GA49 and above.

In default synchronous messaging, the sender blocks while a Message Bus thread dispatches the message to registered message listeners. The sender unblocks when either a response message is received or the sender thread times out.

Note

The sender unblocks on the first response message received.

You’ll send a default synchronous message using an example project. Then you’ll modify the example to make the message time out.

Send a Default Synchronous Message

The example project uses a SynchronousMessageSender in default mode to send a message and wait for a reply.

In an example project, you’ll use a SynchronousMessageSender to send a message directly to two listeners.

Start a new Liferay instance by running

docker run -it -m 8g -p 8080:8080 liferay/portal:7.4.3.48-ga48

Sign in to Liferay at http://localhost:8080. Use the email address test@liferay.com and the password test. When prompted, change the password to learn.

Then, follow these steps:

  1. Download and unzip the example.

    curl https://resources.learn.liferay.com/dxp/latest/en/building-applications/core-frameworks/message-bus/liferay-m4q7.zip -O
    
    unzip liferay-m4q7.zip
    
  2. Build and deploy the example project modules.

    cd liferay-m4q7
    
    ./gradlew deploy -Ddeploy.docker.container.id=$(docker ps -lq)
    
    Note

    This command is the same as copying the module JARs to /opt/liferay/osgi/modules on the Docker container.

  3. The Docker container console shows module startup.

    STARTED com.acme.m4q7.able.impl_1.0.0
    STARTED com.acme.m4q7.baker.impl_1.0.0
    STARTED com.acme.m4q7.charlie.impl_1.0.0
    
  4. Visit the Liferay instance with your browser at http://localhost:8080 and sign in using your credentials.

  5. Open the Gogo shell.

  6. In the Gogo shell command field, enter m4q7:sendMessage followed by a message. For example,

    m4q7:sendMessage foo
    
  7. Confirm the output looks like this.

    INFO  [acme/m4q7_able-2][M4Q7CharlieMessageListener:23] Received message payload foo
    INFO  [acme/m4q7_baker-2][M4Q7BakerMessageListener:21] Received message payload M4Q7CharlieMessageListener
    INFO  [pipe-m4q7:sendMessage foo][M4Q7BakerOSGiCommands:28] Response: M4Q7CharlieMessageListener
    

At the acme/m4q7_able destination, M4Q7CharlieMessageListener received the Gogo shell message. At the acme/m4q7_baker destination, M4Q7BakerMessageListener received the response message from M4Q7CharlieMessageListener. Lastly, M4Q7BakerOSGiCommands’s sendMessage method logged the response object returned from the message sender.

Project Overview

The three example module classes manage destinations, listen for messages, and send messages.

m4q7-able-impl module: M4Q7AbleMessagingConfigurator creates a message destination named acme/m4q7_able and registers it with the Message Bus.

m4q7-baker-impl module:

  • M4Q7BakerOSGiCommands sends a message to the acme/m4q7_able destination and logs the response.
  • M4Q7BakerMessagingConfigurator creates a message destination named acme/m4q7_baker and registers it with the Message Bus.
  • M4Q7BakerMessageListener listens for messages sent to the acme/m4q7_baker destination and logs the message payload.

m4q7-charlie-impl module: M4Q7CharlieMessageListener Listens for messages sent to the acme/m4q7_able destination, logs the message payload, and sends a response message to the original message’s response destination.

Here’s the event flow:

  1. You invoke the m4q7:sendMessage Gogo shell command, passing in a message.
  2. M4Q7BakerOSGiCommands’s sendMessage(String) method triggers on the Gogo shell command and sends the command arguments in a message to the acme/m4q7_able destination.
  3. A Message Bus thread delivers the message to M4Q7CharlieMessageListener.
  4. M4Q7CharlieMessageListener logs the message payload and sends its own class name in a response message to the original message’s response destination acme/m4q7_baker.
  5. M4Q7BakerMessageListener receives the response message and logs its payload.
  6. Processing returns to M4Q7BakerOSGiCommands, where it logs the response to the original message.

Now examine each class, starting with the destination configurators.

Examine the Destination Configurators

The m4q7-able-impl module and m4q7-baker-impl module have destination configurator classes M4Q7AbleMessagingConfigurator and M4Q7BakerMessagingConfigurator, respectively. They each create and configure destinations.

The M4Q7AbleMessagingConfigurator class configures the acme/m4q7_able destination:

@Component
public class M4Q7AbleMessagingConfigurator {

	@Activate
	private void _activate(BundleContext bundleContext) {
		DestinationConfiguration destinationConfiguration =
			DestinationConfiguration.createSerialDestinationConfiguration(
				"acme/m4q7_able");

		Destination destination = _destinationFactory.createDestination(
			destinationConfiguration);

		_serviceRegistration = bundleContext.registerService(
			Destination.class, destination,
			MapUtil.singletonDictionary(
				"destination.name", destination.getName()));
	}

	@Deactivate
	private void _deactivate() {
		if (_serviceRegistration != null) {
			_serviceRegistration.unregister();
		}
	}

	@Reference
	private DestinationFactory _destinationFactory;

	private ServiceRegistration<Destination> _serviceRegistration;

}

The M4Q7BakerMessagingConfigurator class configures the acme/m4q7_baker destination:

@Component
public class M4Q7BakerMessagingConfigurator {

	@Activate
	private void _activate(BundleContext bundleContext) {
		DestinationConfiguration destinationConfiguration =
			DestinationConfiguration.createSerialDestinationConfiguration(
				"acme/m4q7_baker");

		Destination destination = _destinationFactory.createDestination(
			destinationConfiguration);

		_serviceRegistration = bundleContext.registerService(
			Destination.class, destination,
			MapUtil.singletonDictionary(
				"destination.name", destination.getName()));
	}

	@Deactivate
	private void _deactivate() {
		if (_serviceRegistration != null) {
			_serviceRegistration.unregister();
		}
	}

	@Reference
	private DestinationFactory _destinationFactory;

	private ServiceRegistration<Destination> _serviceRegistration;

}

Both configurators are Component classes. They use the @Reference annotation to inject a DestinationFactory instance.

The _activate(BundleContext) method uses the DestinationFactory and a DestinationConfiguration to create a serial destination. Lastly, the _activate(BundleContext) method registers the Destination in an OSGi service using the BundleContext.

Warning

Only use serial or parallel destinations with default synchronous messaging. You can create them by calling DestinationConfiguration’s createSerialDestinationConfiguration(String) and createParallelDestinationConfiguration(String) methods.

Don’t use synchronous destinations with default synchronous messaging because they nullify message sender timeouts.

When the configurators deactivate, their _deactivate() methods unregister the destination services.

Examine the Listeners

The m4q7-charlie-impl module’s M4Q7CharlieMessageListener class listens for messages sent to the acme/m4q7_able Destination. It registers the same way Listening for Messages demonstrates.

M4Q7CharlieMessageListener class:

@Component(
	property = "destination.name=acme/m4q7_able",
	service = MessageListener.class
)
public class M4Q7CharlieMessageListener implements MessageListener {

	@Override
	public void receive(Message message) {
		if (_log.isInfoEnabled()) {
			_log.info("Received message payload " + message.getPayload());
		}

		_messageBus.sendMessage(
			message.getResponseDestinationName(),
			new Message() {
				{
					setPayload("M4Q7CharlieMessageListener");
					setResponseId(message.getResponseId());
				}
			});
	}

	private static final Log _log = LogFactoryUtil.getLog(
		M4Q7CharlieMessageListener.class);

	@Reference
	private MessageBus _messageBus;

}

When M4Q7CharlieMessageListener receives a message, its receive(Message) method logs the message payload and sends a response message to the original message’s response destination. The method sets the response message payload to the listener class name and sets the response message ID to the original message’s response ID.

Important

In default synchronous messaging, response messages must use the original message’s response ID and must be sent to the response destination.

The m4q7-baker-impl module’s M4Q7BakerMessageListener class listens for messages sent to acme/m4q7_baker, which is the response destination for M4Q7BakerOSGiCommands’s messages.

M4Q7BakerMessageListener class:

@Component(
	property = "destination.name=acme/m4q7_baker",
	service = MessageListener.class
)
public class M4Q7BakerMessageListener implements MessageListener {

	@Override
	public void receive(Message message) {
		if (_log.isInfoEnabled()) {
			_log.info("Received message payload " + message.getPayload());
		}
	}

	private static final Log _log = LogFactoryUtil.getLog(
		M4Q7BakerMessageListener.class);

}

When M4Q7BakerMessageListener receives a message, its receive(Message) method logs the message payload.

Examine the Sender

The m4q7-baker-impl module’s M4Q7BakerOSGiCommands class provides an OSGi Command that triggers sending the command arguments in a message to the "acme/m4q7_able" destination.

@Component(
	property = {"osgi.command.function=sendMessage", "osgi.command.scope=m4q7"},
	service = M4Q7BakerOSGiCommands.class
)
public class M4Q7BakerOSGiCommands {

	public void sendMessage(String payload) throws MessageBusException {
		Message message = new Message();

		message.setPayload(payload);
		message.setResponseDestinationName("acme/m4q7_baker");

		Object response = _synchronousMessageSender.send(
			"acme/m4q7_able", message, 10000);

		if (_log.isInfoEnabled()) {
			_log.info("Response: " + response);
		}
	}

	private static final Log _log = LogFactoryUtil.getLog(
		M4Q7BakerOSGiCommands.class);

	@Reference(target = "(mode=DEFAULT)")
	private SynchronousMessageSender _synchronousMessageSender;

}

M4Q7BakerOSGiCommands is a service Component of its own class type. It uses an @Reference annotation to inject a SynchronousMessageSender that’s set to default mode (specified by the annotation’s target = "(mode=DEFAULT)" attribute).

Note

In default mode, the SynchronousMessageSender’s send method blocks the calling class until a response message is received or until the sender times out.

M4Q7BakerOSGiCommands’s @Component properties define a Gogo shell command function called sendMessage in the m4q7 scope. The command takes an input String and maps to M4Q7BakerOSGiCommands’s sendMessage(String) method.

The sendMessage(String) method creates a Message with the Gogo shell command’s String as the payload and "acme/m4q7_baker" as the response destination.

The sendMessage(String) method sends the message by calling SynchronousMessageSender’s send(String, Message, long) method, passing in the "acme/m4q7_able" destination name, the message instance, and a 10000 millisecond timeout. In default mode, the SynchronousMessageSender uses a Message Bus thread to deliver the message to message listeners. Execution blocks in the M4Q7BakerOSGiCommands class until a message that has the original message’s response ID is received at the "acme/m4q7_baker" response destination. When the response is received, execution continues in the M4Q7BakerOSGiCommands sendMessage(String) method, where it logs the message response. If the timeout expires before a matching response message is received, SynchronousMessageSender’s send(String, Message, long) method throws a MessageBusException.

Important

In default synchronous messaging, response messages must use the original message’s response ID and must be sent to the response destination.

Now that you’ve seen a message listener reply with a response message, you can test the response timeout.

Demonstrate the Response Timeout

Here’s how to turn off the message response logic to force the timeout.

  1. In M4Q7CharlieMessageListener’s receive(Message) method, comment out the _messageBus.sendMessage(...) call.

    @Override
    public void receive(Message message) {
        if (_log.isInfoEnabled()) {
            Object payload = message.getPayload();
    
            _log.info("Received message payload " + payload.toString());
        }
    
        // _messageBus.sendMessage(
        //     message.getResponseDestinationName(),
        //     new Message() {
        //         {
        //             setPayload("M4Q7CharlieMessageListener");
        //             setResponseId(message.getResponseId());
        //         }
        //     });
    }
    
  2. Redeploy the example project.

    ./gradlew deploy -Ddeploy.docker.container.id=$(docker ps -lq)
    
  3. In the Gogo shell command field, enter m4q7:sendMessage followed by a message. For example,

    m4q7:sendMessage foo
    
  4. Confirm the Gogo shell page looks like this:

    Error: No reply received for message.

  5. Confirm the message in the Docker console looks like this.

    INFO  [acme/m4q7_able-2][M4Q7CharlieMessageListener:23] Received message payload foo
    

M4Q7CharlieMessageListener received the message but never replied to it. The SynchronousMessageSender threw a MessageBusException that was printed in the Gogo shell page.

Congratulations on sending messages synchronously with a timeout.

What’s Next

If you want to explore synchronous messaging using direct mode, see Using Direct Synchronous Messaging in Previous Versions.

If you want to continue processing immediately after sending a message, see Using Asynchronous Messaging.

Capabilities

Product

Contact Us

Connect

Powered by Liferay
© 2024 Liferay Inc. All Rights Reserved • Privacy Policy