Is it possible to set the left-side flyout Menu in Liferay DXP 7.3?
How To articles are not official guidelines or officially supported
documentation. They are community-contributed content and may not always
reflect the latest updates to Liferay DXP. We welcome your feedback to
improve How to articles!
While we make every effort to ensure this Knowledge Base is accurate,it
may not always reflect the most recent updates or official guidelines.We
appreciate your understanding and encourage you to reach out with any
feedback or concerns.
Legacy Article
You are viewing an article from our legacy "FastTrack"
publication program, made available for informational purposes. Articles
in this program were published without a requirement for independent
editing or verification and are provided"as is" without
guarantee.
Before using any information from this article, independently verify its
suitability for your situation and project.
Issue
- Starting from DXP 7.3, the Control Panel is accessible via the waffle Applications Menu replacing the left-side flyout Menu.
- Is there any setting that will allow me to bring back the traditional DXP 7.2 Menu?
Environment
- Liferay DXP 7.3
- Liferay DXP 7.4
Resolution
-
You can switch to the former Menu by following these steps:
1. Go to Menu > Control Panel > CONFIGURATION > System Settings > CONTENT AND DATA > Navigation
2. Select VIRTUAL INSTANCE SCOPE > Application Menu
3. Uncheck "Enable Applications Menu"
Did this article resolve your issue ?
