Submit Feedback
Legacy Knowledge Base
Published Jun. 30, 2025

How to Remove/ Replace the Liferay logo for the instance

Written By

Neil Cuzon

How To articles are not official guidelines or officially supporteddocumentation. They are community-contributed content and may not alwaysreflect the latest updates to Liferay DXP. We welcome your feedback toimprove How to articles!

While we make every effort to ensure this Knowledge Base is accurate, itmay not always reflect the most recent updates or official guidelines.We appreciate your understanding and encourage you to reach out with anyfeedback or concerns.

Legacy Article

You are viewing an article from our legacy "FastTrack"publication program, made available for informational purposes. Articlesin this program were published without a requirement for independentediting or verification and are provided "as is" withoutguarantee.

Before using any information from this article, independently verify itssuitability for your situation and project.

Issue

  • The Liferay Logo, on the upper left-hand side of the site needs to be removed/replaced. 

Environment

  • DXP 7.4, DXP 7.3, DXP 7.2, DXP 7.1, DXP 7.0 

Resolution

  •  You could replace the logo by going to Control Panel, Under Configuration > Instance Settings > Miscellaneous. You can find more helpful details here.

Additional Information

Did this article resolve your issue ?
Legacy Knowledge Base
Did this article resolve your issue ?